Phone

Hello, We have a user that is set up so that all calls to their Zoom line forward to their private mobile number, and if no one picks up then the call disconnects. This is how it is designed to work. However, a caller was recently able to leave a voicemail on their Zoom line. However, this should not be possible as the settings show that when caller is--busy it is set to- call waiting-when call is not answered it is set to- disconnect. Is there some keypad code to bypass the mobile forward and leave a VM on the Zoom line or some other bypass? And is there a way to prevent this?

We're rolling out new phones - Poly CCX600s & VVX450s. We have no problems doing things with and to the VVX series of phones in our network or anywhere else. The CCX however is causing us grief. We cannot get them to come up in our network. We can connect and provision them just fine in networks outside of  our network but when we’re within the confines they will not connect. When we plug them in they go into an endless reboot cycle. To try to break that then we reset to factory defaults but the same thing happens and they just go into perpetual reboot. When we watch them on the switch we seem them power up but their MAC address never registers before they reset themselves. One observer said he has seen/heard of this before where some phones “rewrite” or “mask” the MAC  address for some reason but I can't find anything on any Poly docs about that, or this problem or any troubleshooting for it. In short I guess that it is failing to connect at Layer 2 so the

Hello, I would like to set up a BLF on our Yealink phones so users can join or leave a call Queue.  I see a basic list of DTMF tones in the following article; however, I can't find any mention of what the DTMF tone would be to activate this on the phone. https://support.zoom.us/hc/en-us/articles/360057122592-Using-and-customizing-DTMF-codes#h_01F0XPQWX91HNRRSGXGSGM9SRG I did follow the part about adding or customizing DTMF tones if you are an admin; however, I can't add to the two.   

I am a new Zoom phone admin and we seem to be having some troubles with call forwarding. We are mostly using Poly vvx250 phones, but we have 2 receptionists that use vvx450s (pretty much the same thing).The receptionists are used to accessing features from a physical phone and seem to be hesitant to use the zoom portal settings.From a simple extension desk phone, I can use a soft key button to forward calls to another extension and any calls are forwarded fine regardless if it's an internal or external incoming phone call.But if we try to replicate the same process on either of the receptionists phone, the phone calls are not getting forwarded. There is no notification on either phone of a call and neither phone will ring.The only difference I can think of, is both of these reception phones are members of their own call queues.I can't find any call queue settings that should affect the phone's forwarding process but I can't think of anything else that is different.One work around is ge

My team is in the process of testing power pack for deployment to receptionist and is having issues. It seems that it shows up for some users as an option but not for others that have the same exact settings (including call queues,  delegation, calling plan, etc.) Are we missing something obvious?

Hi all, We are currently in the process of moving from Cisco CUCM to Zoom Phones. As a larger organization with a small IT department we don't have the manpower to port all of our phones at once. Most of our users are used to using 4 digit dialing for interoffice communications, and we don't want to ask them to use 10 digit for an extended period of time. We have a way in CUCM to create 'mobility'/forwarding to external numbers and automatically assign them to users via CSV. is there a way to do something similar in the zoom admin console? Thanks!

I am employed with  a company that uses Zoom Phone and I'm assigned a Zoom phone number with them. I also own a business and would like to create a  Zoom Phone account. Is it possible to have both accounts work simultaneously on the Zoom app on my iPhone? An example, an employer client can call my Zoom number associated with the employer number, and my client of mine can call me on my business Zoom number. Could I receive both calls on the app, like being signed into both businesses at the same time?Thanks! 

Hello, Is there a way to turn off calls on Zoom desktop app but still receive calls on the Zoom mobile app? Or is there a way to make the zoom desktop app not take precedence when someone calls? For example, I'm typing an email and someone calls. It switches to Zoom and I can't type anymore. Is there a way to make it just appear in the background?

Hello, When someone calls me from inside my company using my extension, when it rings to my cell phone I have to now press 1 to answer the call.  This recently started happening.  It sometimes hangs up when I go to press 1.  Has this happened to anyone or does anyone know why this is happening? Thanks,Tonya

Hi Community, From my observations, when creating a user via SAML or SCIM, there is no way to automatically assign extensions and phone numbers to the user. In other words if you don't provide a valid extension and available phone number attribute, the user creation will not be provisioned with zoom phone capability.  In fact, if you don't provide at least an extension number, the user will not even appear as a phone users, even if you provide a license.  This creates an issue for medium to large companies, especially in the context of avoiding manual work associated with new users.  Currently we are thinking of solving this by adding a layer of automation script to help assign extensions, but would want avoid this step if possible. This automation would basically query zoom to find the next available phone numbers and extensions, and assign those to the users IDP (azure in our case) attributes for extension and phone number. Those attributes would th

Hi I’m have trouble with my my zoom app on my phone with an error code 1132 can anyone help? Thanks lynne 

I am the safety director at a small high school.  Last year our IT dept. switched our phone system from a traditional hard wired system to a ZOOM Voip system.  One of the features we lost was the ability to use our phone system as an emergency mass alert system.  With the previous system we were able to dial a number, speak into the phone and that message would be relayed to all phone extensions in the school.   What I am looking to find out is if this can be done on the ZOOM Voip system and if so how. Thanks for any advise, Walt GrzybDir. of Safety, Fryeburg Academy 

Hello!Our phones which are in a calling group are unable to make outbound calls but can receive calls. I have already tried the  fix below but it did not help, even after rebooting the phone twice and waiting days.Zoom web portal > Account Management > Account settings > Zoom phone > look for "Allowed Call/SMS Locations" and disable this option.

Hello, i recently got a Yealink W56H i got it set up to make outgoing calls but can't figure out how to receive calls. every time I call it, it tells me it can't be completed and hangs up. first time setting up an IP phone. any help would be appreciated.

Wondering if anyone else has had this issue,  I have an Iphone 14, the app is updated and phone calls won't come through unless i am in the app. Does anyone know how to fix this?

Just started with Zoom phone - have been able to call out to a couple of customers but just now couldn't call out to an area code that is associated with a region 150 miles away.   I got the voice error message "sorry we could not complete this call. your service plan does not include this destination".  Please help!

Issue is, calls placed / recorded via Zoom's Salesforce Dialer, are not triggering branching (completed calls don't move contacts threw Sales Cadences, etc)High Velocity Sales Call Results for Branching Zoom Settings Zoom Phone Settings > Phone-Customize Call Log FieldsAm I missing something???

Dear All,Let is me ask how are zoomphone supports H2/H2P DeskPhones from Alcatel-Lucent? 

I am the only user of my new Zoom phone subscription. My single main company phone number is asking for the extension and I do not want that. For direct dial, do I have to assign a second phone number to me, the only user and admin?

Hi all, I have a small challenge. We have a collaboration partner who is going to move into our space at one of our offices. Per the contract we are to provide them with phone service. Seems straight forward right? Well I can't give them a phone account unless I set them up with at least a Zoom Meeting license as part of our Zoom domain.  I invited them to join our Zoom using a Basic account.  I then learned they already have Zoom meetings.  Zoom meetings are part of their domain. My question is this:  is there a way for me, using my companies Zoom domain, to create individual Zoom Phone instances with lines and associate this with their existing Zoom Meeting licenses?   Your help is greatly appreciate.Mike

Hello,We have replaced our Cisco Deskphone by Zoom phone.With the old system, I could configure that :From Monday to Saturday, From 07:00am to 19:00, all incoming calls are forwarded to my mobile phone.Out of these time frames, the incoming calls are just going to the Cisco answering machine and I received a mail with the voice message. How can I configure this functionality with Zoom phone ?I did some searches, read a lot of documentation but couldn't find anything related to that. Thanks and regards.

I noticed a new option for the Greetings & Leave voicemail instruction allowing to edit an existing greeting. But when I click to edit an existing text to speech greeting the "upload" option is showing instead of the text-to-speech window. How do you change an existing greeting? 

Does anyone know how to mute the dial pad sounds when dialing a number? They are extremely loud and annoying.

Hello,Today I read a deployment guide for ZPLS. It does not yet explain for SBC connection though, is an SSL certificate required in near the future? Or is it not required if SBC and the ZPLS sit the same local network? Best regards,

Anyone know who the main backbone providers are for Zoom?  We continue to ask Support, and they ignore the question.   We have a SMS integration issue, and want to get the providers on both sides of the issue together.  This has been hampering a new product test for the last three weeks or so.