Meetings

Good day, We have a licensed Zoom account and regularly assign two alternative hosts for our meetings. Recently, we changed our email domain, and since then, we’ve encountered an issue when assigning these hosts using their new email addresses.Whenever we try to assign them as alternative hosts, we receive the following error: “Unable to assign [new email] as an alternative host because the user cannot be selected at this time.”However, assigning them using their old email addresses still works without issue. Could you please advise how we can assign them as alternative hosts using their new email domain? We want to ensure our Zoom setup reflects our updated contact information. Thank you for your assistance.

It is possible to interact with participants in the waiting room before the admin allows to enter to the main room? Is That Possible to have an interactive waiting room? 

Hi there!I've recently started using Zoom for my online classes. I would like to "screen share" a shared Google doc during our call, so we can both type in it. I know I can screenshare a tab in my browser, but then I won't see my student's face while working on it. Does anyone know a solution for this?  Many thanks!

On a Lenovo ThinkPad T14 Gen 5 with AirPod Pros Gen 2. Issue started when I opened up Zoom (6.6.6.) this morning and was greeted with a "Failed to detect your speaker. Please make sure your speaker is property connected." Sometimes it's "Failed to detect your microphone. Please make sure your microphone is properly connected."  Since then, I have done the following recommended fixes: Updated my Windows (11). Updated my audio, Bluetooth, and system drivers using Lenovo Vantage. Updated my Zoom. Uninstalled/reinstalled Zoom Workplace. Disconnected/reconnected my AirPods. Disconnected AirPods from all devices.Factory reset my AirPods. Reset my laptop at least five times throughout all of this. Ensured AirPods are selected as both microphone and speaker in Zoom, trying both "same as system" and "headphones" (they work as both outside of zoom).Ensured my laptop is giving access to Zoom to use my AirPods as a speaker/microphone (via system se

Почему конференция автоматически завершается, когда я ее начинаю? Последняя версия приложения, платная лицензия

why are some recording files 3 to 5 times larger than others?we have several user accounts that record one-hour videos.one account generates one-hour video files that are 150MB.Another account's one-hour video would be 700MB. Why?

Unable to turn off auto zzom feature on whos speaking. We would like to just have the entire room on camera to avoid issues. But cannot find any setting related to auto zoom / auto framing. We know on Macs its avilable to turn off.....how do we turn off on windows devices?

When I take a screenshot during a zoom call, the app closes completely. I had never had this issue in the past.I am using most recent Android app on Pixel 7a.Already restarted my phone. No changes.

Trying to get into class for Eugene LCC GED.

I've gone the merry-go-round with Chat 4 times and this is what as resulted (a) the camera still remains black (b) the tests it put me through show that the problem is compatibility between Zoom and Workplace, yet I have no choice but to open with Workplace.  My camera works perfect with the Windows Camera App.  All permissions, etc etc have been confirmed.This just started today during a meeting.Do you think that this is a deliberate tactic that Zoom uses to make us upgrade.  I don't use it often, so upgrading makes no sense.  Chat said that no live help or IT support will help until I upgrade.The problem is very definitely not at my end.  It seems to be a built-in flaw to generate more revenue.I'm not sure if I can find this forum again, so please email your reply to me at ***********.   Many thanks.

Our event was recorded, but the virtual background in the recording has the logo of a different event in our Hub. We need to remove the virtual background with the incorrect logo. Can you asist?

My Zoom video shows me upside down.  The background image is correct but not the "front" of the background.  Which displays an upside down image.  See screenshot below. And Yes, I have checked the camera.  It works fine.  It is definitely is Zoom. Done a search on this community site and found nothing. There is nothing wrong with the camera.  As it works in all other applications, but not in Zoom.   I can temporarily remedy this by turning off the video - and just show a still of me.  But I host tons of Zoom meetings and it would be great to solve this!   THANKS!    

I'm using Windows 10.I have zoom on my laptop.When I'm not connected to internet, my zoom application keeps giving me pop-ups that cover the foreground and never go to the background even when I click on other apps. Even when I want to do something without internet, I can't do anything because the pop-up covers the screen.That pop-up says something like unable to make secure connection.Even after I close that pop-up, it pops up again and again and again.I want it to stop doing that. How can I make it stop?

Zoom was working before an update. Now on a user's laptop, after the update, anytime we open a zoom meeting/start a zoom meeting, it will freeze or crash after the camera begins to show a preview. Zoom will sometimes return after a minute or so.I have tried:Checked Windows System updatesChecked  driver updates for Camera - installed latest from laptop manufacturer's websiteChecked Wi-Fi speed and signal.Uninstalled/reinstalled the latest version as of last weekChecked Camera permissions in Windows for the Zoom appI am at a loss for what else to try! It looks to have to do something when the meeting is in the pre-start stage before the meeting is actually created. 

I have recently been dropped into meetings and webinars where the image is cluttered with intrusive and distracting watermarks all over. As I understand it, if I'm not a host then I cannot do anything about it. That's bad. Could Zoom change the default? Could Zoom allow me to first give consent? If the host, perhaps just because they are not aware of the defaults, show my email in e.g. a webinar without my consent, that's not good. Best regards//Bjorn

I have recently obtained an Insta360 Link 2C camera (and a Link 2 as well). When I set the camera to 1080p and 30fps in the camera control app all is good until I open a preview or call in Zoom. Then the camera is forced back to only 720p in the camera app. While the camera is being used in Zoom the setting cannot be changed. So I pause the video in Zoom, then change the resolution, then go back to Zoom and it happens again. This only happens in Zoom with the Insta360 Link 2 cameras. It does not happen in other video call services and does not happen with other brands of cameras in Zoom. The zoom and camera apps are fully up to date. The camera firmware is up to date.I uninstalled all the apps anyway and did fresh installs. No change. PC:Win10 ProfessionalRyzen 9 3950X32GB RamRTX2060 Zoom online chat doesn't understand. Insta360 have people trying to investigate the problem. Anyone have this issue and solved it? How do I fix this please?In every other plat

I am the only user and owner of my Zoom account. Still, I can't change certain security settings (under Settings > Meeting > Security) because Zoom says there are "new security guidelines" and refers me to the "account admin". But I'm the owner/admin and sole user. How is this possible? And how can I solve it?

In the post-secondary education world, instructors need to provide spaces for students to collaborate with each other other than during class time. In order to provide private spaces to meet, instructors would like to open some 'virtual team spaces' for different groups of students in different classes. This involves using the 'no fixed time' and 'Join before host' settings. As it stands, instructors (hosts) can schedule as many meetings as they want but only 2 of those meetings can be open/used at the same time regardless if the host is present or not. This is not workable for how our instructors utilize the system. some instructors have 4 different courses and each one of them could have team projects that need to use these open spaces at any given time during the day/week/semester. How do we or can we work around this?Have any other users from the Education world come across this?All help is welcome. 

My Church seems to get better quality out of Zoom than the New Jersey State Superior Court.  Last Friday I had to attend a virtual pretrial hearing where the Court uses Zoom for these appearances.  I call this trial rigging.  The overall quality, especially the audio, was poor.  I should be used to this by now; but I don't want to experience more consequence than necessary.  Most parties to these hearings just put up with the bad quality because they want it over with.  From a trial I attended last year, my audio/video transcript the Court gave me last year reflects the same bad quality.  As with the recent hearing, the audio had an underwater quality to it.  The Court I noticed uses metal boxes with glass fronts to house the TV that they connect with Zoom.  Through these hearings and trials, the Court makes Zoom look bad while delivering such poor quality.

When I am on Zoom my face appears unnaturally bright red. Very distracting. Is there a way to adjust the hue or tone for the camera? 24" iMac 2021 M1 running Sonoma 14.6.1.

[Integration – Zoom Meetings] We already have a Zoom Business plan account. We need assistance identifying which Zoom APIs can retrieve the same meeting data available for download from the Zoom Dashboard (Meetings section). Our goal is to ensure that the data obtained through the APIs aligns with the zoom dashboard meetings data in both content and accuracy (date range and/or meeting ids).

I had recording a meeting on zoom cloud with my windows computer.But it was without sign in.How can I download this recording video?

Hi, I get a '403 permission denied' error everytime i log into zoom. i can still use my account as normal but it pops up every time. Any ideas? CheersJohn  

Hi,when I create in Zoom calendar invitation with Zoom Workplace, it is displayed in my Zoom Calendar at the right timing (let's say, 10am).In my Outlook and Mac Calendar, the same for all the participants of the meeting, the invitation appears one hour ahead (e.g., 9am).Any idea?Stéphane

I click my profile picture in Zoom Workplace and select "Add account". It asks me to login, which I do. But it fails to add the account to give me a fast way to switch between two different Zoom accounts. What am I missing, or is this another Zoom bug?