Phone

Is there a way to add a key on a Yealink desk phone to monitor the status of a queue voicemail box? Like a BLF speed dial but that speed dial transfers to the voicemail box of the queue for each user. And monitors whether or not the queue has an unread voicemail.

I was able to modify the help and support page on my E550 under menu, help and support, and contact support. I have our support services business hours, phone number, and logo working. However, I cannot figure out how to also add an email address or additional phone number. Anyone else do this? I followed the link below but it doesn't show an email example. I added the below parameters to a test Zoom Phone Template and assigned it to my E550 only. I tried adding an additional line for email, but no luck.  UI.MENU.HELPANDSUPPORT.CONTACT.ENABLED= "1"UI.MENU.HELPANDSUPPORT.CONTACT.HOURS.1= "Mon-Fri 8AM to 5PM"UI.MENU.HELPANDSUPPORT.CONTACT.NUMBERS.1= "Phone: 1 (321) 987-6543"UI.MENU.HELPANDSUPPORT.CONTACT.CUSTOMERLOGO= "http://Logo.jpg" https://h30434.www3.hp.com/t5/Poly-Phones-Knowledge-Base/Poly-Edge-E-Series-support-and-diagnostics/ta-p/9222354

I have a Samsung Galaxy S10. When a call comes in or I manke an outgoing call using the Zoom app, the call is automatically connected to my watch. Each time, as soon as the call engages, I have to push the bluetooth button and toggle to handset. This does not happen ever if I am just using my phone in a non-Zoom capacity.I've looked and searched. How can I adjust the bluetooth settings? thanks,

Is there a way to assign a user access to street address information for our physical phones? I don't see anything in Roles. Maybe another way?

When we go to an applicable phone number and click on it, Ring Central, Phone, and another app pop up, but not zoom. Anyone have any ideas?

I setup online fax for my user account and fax to my DID from faxpipe. My Zoom phone rings and I get fax tones but I never receive the fax and faxpipe says it fails. I can send outbound faxes from Zoom online fax using my DID but I can’t receive. Any help would be greatly appreciated. 

We have Polycom phones and sometimes the main incoming line flashes red/green but nothing is ringing.  Does anyone know what this means?Sometimes it flashes red/red and its not ringing either.?

I would like to know if it is possible to get raw data more comprehensive and easy to present. What I mean with this is that instead of putting for example the sign-in-out per people in rows, could that be on columns, so it could be easy to manage in Excel? The same thing applies to the people assigned to a queue, where they change to multiple auxiliaries, (bath, meal, downtime Manager Approved, etc.) starting time can be in one column, and the end time in another column, just instead of everything in rows,Thank you in advance for your assistance.

I am managing a group of 8 people who take phone calls. I have the power pack add on added to my license to see the real-time calls waiting, handling time, members available and etc. Whenever someone has to take their lunch/break, they have to "opt-out" to not receive queue calls. Is there a dashboard showing the realtime number of minutes/hours elapsed when someone toggles the "receive queue calls" or like a report that shows the elapsed time when a specific member toggles the "Receive queue calls" and like how many times they toggled it in one day?It's been bugging me for days now and I really don't know how to go around this.

incoming calls are not ringing to the mobile app. They ring on the desktop, but not the cell phone. when I open the mobile phone app there is a message displayed briefly saying there is no network connection. I cannot switch from the desktop to mobile app, it errors out. I know my network connection is good. all other apps are able to operate. I am on Wi-Fi due to the lack of cell signal in our building. this still happens when on mobile data. After the mobile app opens and the connection error message goes away, I can instantly make calls out.

I Zoom Popup Widget that sits on my desktop has suddenly lost it's option for "Phone". My phone account is active and receiving calls, but without this, I am unable to make outgoing calls. When I am in "Home", I click on "More" and the phone is no longer an option. Any ideas? 

Hello, I would only like my cell phone to ring when someone dials my desk phone # or extension directly and not when the main line # is dialed.  It seems like I would accomplish this by turning off the call ques that I am in while leaving the mobile app setting on, but I would have to keep going back to toggle that on and off. I want the main line to function as it does, but segregate the cell phone call when someone calls me directly.....

Hello Zoom Support Team,I am developing a mobile application using the Zoom Video SDK with Flutter for both Android and iOS platforms. The application is focused on enabling real-time audio and video calls between two users.We are experiencing a consistent delay during session joining. It takes around 8 to 10 seconds for both users to connect, and for the audio/video streams to become active.This delay is negatively affecting the user experience.We would like your help in understanding the following:Are there known causes or limitations in the Zoom SDK that might result in this delay?Are there recommended optimizations for improving performance on mobile, especially in Flutter integration?Could the issue be related to token generation, SDK initialization, or event listener timing?We would appreciate any guidance or solutions that can help reduce the session join latency.Thank you for your support.

Hello.  I am trying to get started with Zoom Phone.  I have the Unlimited Calling Plan.  I can receive calls but cannot make calls.  It tells me, "Sorry, we cannot complete your call.  Your service plan does not support calling this destination."  Is there a setting I need to change, or what?

We have had requests for streaming music on hold. Our company provides streaming MOH for Asterisk, Avaya AAMS, CUCM, Engage, FreeSWITCH, Broadsoft and other platforms. Anybody know about streaming URL for Zoom Phone?

Hi, I'm following the instructions in "SMS/MMS 10DLC Compliance for Zoom Phone and Zoom Contact Center" (https://support.zoom.us/hc/en-us/articles/5016496738445) and don't see this tab under Advanced on our admin page. Instructions: Menu: Am I in the right place? Is there something that needs to be done to enable it? Thanks! Todd

I have set up my system to forward to my cell phone and it is not working. From everything I can see the settings are correct but it is not working.

Hi All, I recently joined Zoom so that I could make calls from South Africa to Canada, but it seems that the service is not available on this plan that I selected. I recently purchased an Unlimited Plan to Canada but have not been able to make any calls. Each time I have tried, I receive the following message: "Sorry...the requested service is not available in your calling plan".  I added the international calling as an add-on to the above plan, but I still cannot make calls. Also, I am unable to receive calls, too! So now I'm confused ( have I not set it up properly? Am I not dialling numbers correctly?) and worried that perhaps I have purchased an incorrect plan. Can someone please assist me or give me pointers. Thanks

Hi, I’ve purchased a Zoom Phone license with the U.S./Canada Unlimited Calling Plan (1 license – active), but I can’t assign a phone number to my user.When I go to Phone System Management → Users & Rooms, I get this message: “You need more licenses.” I’m the account owner and the only user. No numbers are showing up for assignment.I also can’t manually purchase or add one from Plans and Billing.This is blocking me from making any calls, and I’m actively paying for the service. I’ve submitted a support ticket but haven’t received a response yet.Ticket number: TS1873868 Can someone from Zoom please resolve or escalate this? Thanks.Adam

I am seeing faxes from Athenahealth mostly but occasionally others, being split into two separate faxes.E.g. 1st fax pages 1-6 and then a 2nd fax with pages 7-11.Oddity is that it's also only one specific location/fax line seeing this behavior. Path is as follows:Zoom Fax # "X" > Auto Receptionist "X" that forwards to > EMR fax # "A"This is the one splitting sometimes Zoom Fax # "Z" > Auto Receptionist "Z" that forwards to > EMR fax # "A"This one, and many others configured similarly have never seen this issue This is all within their normal PBX config, nothing related to online fax.Our EMR vendor is at a loss.I cannot find any meaningful config differences between other fax lines, and the one with the issue.(Beyond the obvious like a different fax # and name).Hoping someone else has seen similar issues? Have not found anything as of yet...

I am new to Zoom and all I want is a replacement for Skype. Where is the phone icon so that I can call my mother? Please!

Is it possible to limit recording access for specific users/departments/sites.  I'll explain a bit further as I know I can create roles, but here is a scenario: User A at Site A has all their calls recording for auditing purposes. Someone who can can review the calls for Site A sees the calls from User A as expected. User B works at Site B in HR, and by default does not have their calls recorded.  When User A calls User B the call is still recorded because we record user A's calls.  Is there a way to prevent the auditor for Site A from listening to that call.   We use to use DVS Analytics that allowed us to provide some logic to that calls were excluded.

Our T57W Yealink phones were experiencing intermittent audio issues. We found that they were not on the latest Yealink firmware. Instead of 97.87.0.15 that was released March 10, 2025, they were still on 96.86.3.17. The Zoom Chat Agent couldn't explain why they haven't pushed out the latest release, does anyone know?  After I manually updated the firmware on each device through the IP GUI the audio issue hasn't resurfaced.  I just hope to not have to manually update the next time Yealink releases a firmware update.    

Hello,  Does anyone know how to apply a custom background and organization logo to replace the default Poly logo and background? We have about 200+ Edge E220s and I would love to integrate that element into our setup.  Many thanks.

I am the first person in the call queue and when I answer an incoming call using my mobile device, the switch icon appears at the top of my desktop Zoom app.  If nothing is selected, it will automatically switch from my mobile device to the desktop app without me doing anything.  I have reached out to Zoom and they are suggesting that I turn off my desktop application for phones but I never had this issue until I switched from a Galaxy to an iPhone.  We just recently added a Zoom Room to our account and thought that maybe it was detecting the Zoom Room so i can switch to that but calls I have answered while at home still have the switch icon at the top.  Has anyone else experienced this issue?  What am I missing?